android
Go Back   abi>>forums > MP3 Players By Brand > Samsung > Samsung Q1 / Q2

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-03-2012, 05:54 PM
VanniX VanniX is offline
Member
 
Join Date: Nov 2011
Location: Italy - Clowns country
Posts: 120
Default [Tutorial] YP-Q1 - Mods + USB-Boot tool + board images

Samsung YP-Q1 Mods thread
LAST UPDATE: 20121205
WARNING: INCOMPLETE!


Unbrick guide:
* Read all step before start the process.
* Download the tcctool from the "Links" section below.
* If you are using windows download also the driver package.
* Download the Q1 firmware.
* Create "tcctool" directory in ~ for Linux or in c:\ for Windows.
* Extract all files in ~/tcctool or c:\tcctool.
* Connect YP-Q1 to PC, and wait until is powered on.
* Put Q1 in USB-Boot mode (read "USB-Boot mode" section below)
* Now:
- - - If you are using Linux check if a TCC870X device is connected with "lsusb" in console.
- - - If you are using windows you have to install drivers and check in device manager if the player is correctly recognized as a TCC7801 (or similar) CPU.
* Open terminal/cmd as superuser/administrator.
* Move inside tcctool directory.
* Run:
- - - If you are using Linux_i386 ./tcctool86 -d ypq1 Q1.ROM
- - - If you are using Linux_AMD64 ./tcctool64 -d ypq1 Q1.ROM
- - - If you are using windows tcctool.exe -d ypq1 Q1.ROM
* Wait for player reboot.
* Player will now be recognized as USM "USB Mass Storage".
* Copy the Q1.RSC file inside the player root.
* Unmount from pc (safely remove for windows).
* Disconnect, wait a few seconds and power on the player manually.
* During update process player will probably shutdown automatically. Don't worry, simply power on it again.


WW -> KR Firmware conversion:
You have to use the Unbrick guide and flash the KR ROM.
Here the KR download page http://www.samsung.com/sec/support/m...lDownload=true

Alternative firmwares:
Not available yet.


Rockbox port:
Possible, but not available yet.


USB-Boot mode:
Connect YP-Q1 to PC, safely remove it, press and hold "Power" button while pressing "Reset" (on the back side). Wait more or less 5-10. Now release "Reset" and then release "Power".
A new device will be recognized. In Windows a "new unknown device" will appear (you'll need drivers), in Linux you'll see something like that in lsusb:
Bus 001 Device 013: ID 140e:b011 Telechips, Inc. TCC780X-based player (USB Boot mode)


TCC tool links:
Linux (i386 only): http://dl.dropbox.com/u/21543264/YP-...Q1_i386.tar.7z
Linux (AMD64 only): http://dl.dropbox.com/u/21543264/YP-...1_AMD64.tar.7z
Windows (AMD64 only *): Coming soon...
All-in-one pack (x86, AMD64): Coming soon...
Telechips Windows drivers (x86, AMD64) : http://dl.dropbox.com/u/21543264/YP-..._WinDrivers.7z

* Other architectures will be soon available.


Hardware:
CPU: Telechips TCC7801
RAM: Samsung K4M5632-3PG HG75
NAND: Samsung K9HCG08-U1M PCB0
DAC: Wolfson WM1808G
BATTERY: Generic Li-Ion 3.7V 620mA
LCD: TODO
TOUCH: TODO


Internal/Board IMGs:
http://dl.dropbox.com/u/21543264/YP-...C121203003.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203004.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203005.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203006.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203007.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203008.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203009.jpg
http://dl.dropbox.com/u/21543264/YP-...C121203010.jpg


IMPORTANT: All users who want to help are welcome!

Last edited by VanniX; 12-11-2012 at 04:51 PM.
Reply With Quote

Advertisement [Remove Advertisement]

  #2  
Old 12-04-2012, 02:56 AM
lebellium's Avatar
lebellium lebellium is offline
Samsung Moderator
 
Join Date: Sep 2007
Location: Paris
Posts: 3,616
Default

I thought the DAC of your Q1 doesn't work anymore? Is it still the case or did you repair it?

As you know I lent my Q1 to a friend some time ago. Therefore I can't help for the moment but if this thread gets interesting (rockbox? ) I still can get my device back or buy another one!

The tcctool tutorial for T10 works for Q1: http://www.anythingbutipod.com/forum...ad.php?t=30116

Quote:
WW -> KR Firmware conversion:
What is WW?!
__________________
I'm French^^ *GenerationMP3 Samsung Moderator*
Reply With Quote

  #3  
Old 12-04-2012, 08:27 AM
VanniX VanniX is offline
Member
 
Join Date: Nov 2011
Location: Italy - Clowns country
Posts: 120
Default

WW -> WorldWide XD
Thank you, i'll take a look in the T10 thread.
DAC is damaged, but left channel works, so i can test audio output
Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -5. The time now is 12:23 PM.