YP-R0 - Stuck/Freeze/Reboot during boot
I recently discover that some lots of YP-R0 are having some boot issue.
This appen with all ROMs (Official, ModFirm, LightROM and all other minor modifications), and it's probably caused by a defective NAND chip. These freezes are caused by a Kernel Panic while inserting the NAND Samsung module wmr.ko.
Probably there are some bad sectors in NAND, and they cause random freezes or reboot during startup.
If the bad sectors are in the bootloader and in the kernel partition the player won't never boot up, but it only stuck on "Samsung" logo or Linux penguin (in case of any modded ROM is installed). In this case you could only try to reflash with the "flash cable".
If the bad sectors are on cramfs or in other partitions (media0, media1) the player will stuck on Samsung/Linux logo for about 15 seconds, then it will reboot automatically until it can correct all bad sectors found.
Cases of damaged YP-R0:
YP-R0 CB/XER , S/N 1U0Z969____ , Ver: 8Gb.
YP-R0 JEP/EDC, S/N 1U1SA12____ , Ver: 16Gb.
YP-R0 JCB/EDC, S/N 1U1V911____ , Ver: 8Gb.
At the moment it seems that YP-R0 with serial number starting with "1U" could have a defective chip.
This thread is for informational and statistical purposes only. If you are also having this kind of issues, please, report here the details of your YP-R0 as above.
The 1U0Z969____ player is back to work after some random power on and reset.
The 1U1SA12____ player is definitely dead after an ECC error during flash with ATK tool.
tags: defective r0 nand wmr serial 1U freeze bootloader stuck samsung linux logo penguin
ROMs List: http://dl.dropbox.com/u/21543264/YP-...eases/ROM_List
Free donation button: ---> ===> DONATE! <=== <---
http://www.hacklabproject.org | http://repofulm.dyndns.org/
Last edited by VanniX; 12-27-2012 at 08:25 AM.
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 07:24 PM.