android
  #1  
Old 08-07-2009, 10:30 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default Sony NWZ-X1050 Won't Mount on Linux Debian Lenny

Hey guys,

I'm wondering if you could help. I just got an X1050 since I thought the player would revert to removable disk if I'm not on Windows like it said it would.

However, whenever I try connecting it, an icon pops up that says "Sony Walkman," but when I try clicking on it, it says "Unable to Mount Media" and "There's probably no media in the drive."

I'm stumped here. I have another Sony Product (Sony Reader) that's said to work the same way: Windows only but reverts to removable disk on everything else.

So, I really don't know what's up. I Really really do not want to use windows man.

Please help!

regards,

lorsban
Reply With Quote

Advertisement [Remove Advertisement]

  #2  
Old 08-08-2009, 10:22 AM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

My first post

Ok. I am using GNU/Linux for more than 12 years, and already stayed away from Microsoft OS since 2000 . Hope I can help you.

Now, please paste the dmesg command results, especially after 30 seconds after you pluggin your X.

Also, paste the lsusb result here.

Thank you.
Reply With Quote

  #3  
Old 08-08-2009, 12:22 PM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Hello bahathir!

Thanks for your reply and welcome to Anythingbutipod! Hope I can follow your example and be M$-free as well!

Anyway, here's dmesg:

Quote:
[ 1.273156] pci 0000:00:02.0: Boot video device
[ 1.273156] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.273156] assign_interrupt_mode Found MSI capability
[ 1.273156] Allocate Port Service[0000:00:1c.0cie00]
[ 1.273156] Allocate Port Service[0000:00:1c.0cie02]
[ 1.273156] Allocate Port Service[0000:00:1c.0cie03]
[ 1.273156] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.273156] assign_interrupt_mode Found MSI capability
[ 1.273156] Allocate Port Service[0000:00:1c.1cie00]
[ 1.277103] Allocate Port Service[0000:00:1c.1cie02]
[ 1.277103] Allocate Port Service[0000:00:1c.1cie03]
[ 1.277103] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.277103] assign_interrupt_mode Found MSI capability
[ 1.277103] Allocate Port Service[0000:00:1c.2cie00]
[ 1.277103] Allocate Port Service[0000:00:1c.2cie02]
[ 1.277103] Allocate Port Service[0000:00:1c.2cie03]
[ 1.277103] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.277103] assign_interrupt_mode Found MSI capability
[ 1.277103] Allocate Port Service[0000:00:1c.3cie00]
[ 1.277103] Allocate Port Service[0000:00:1c.3cie02]
[ 1.277103] Allocate Port Service[0000:00:1c.3cie03]
[ 1.277103] isapnp: Scanning for PnP cards...
[ 1.633094] isapnp: No Plug & Play device found
[ 1.637754] hpet_resources: 0xfed00000 is busy
[ 1.637754] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.645712] brd: module loaded
[ 1.645712] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.678009] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.678009] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.678009] mice: PS/2 mouse device common for all mice
[ 1.681688] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.681688] rtc0: alarms up to one month
[ 1.681688] cpuidle: using governor ladder
[ 1.681688] cpuidle: using governor menu
[ 1.681688] No iBFT detected.
[ 1.681688] TCP cubic registered
[ 1.681688] NET: Registered protocol family 17
[ 1.681688] Using IPI No-Shortcut mode
[ 1.681688] registered taskstats version 1
[ 1.681688] rtc_cmos 00:03: setting system clock to 2009-08-08 17:09:57 UTC (1249751397)
[ 1.681688] Freeing unused kernel memory: 244k freed
[ 1.714421] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.871465] ACPI: SSDT 7F7AE180, 023C (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 1.871465] ACPI: SSDT 7F7AE450, 0724 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 1.871465] Monitor-Mwait will be used to enter C-1 state
[ 1.871465] Monitor-Mwait will be used to enter C-2 state
[ 1.871465] Monitor-Mwait will be used to enter C-3 state
[ 1.871465] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.871465] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.871465] ACPI: Processor [P001] (supports 8 throttling states)
[ 1.871465] ACPI: SSDT 7F7AE0B0, 00CC (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 1.872019] ACPI: SSDT 7F7AE3C0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 1.875466] Marking TSC unstable due to: TSC halts in idle.
[ 1.879458] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.879458] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.879458] ACPI: Processor [P002] (supports 8 throttling states)
[ 1.882445] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.901420] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.919401] ACPI: Thermal Zone [TZ00] (42 C)
[ 2.924802] usbcore: registered new interface driver usbfs
[ 2.924802] usbcore: registered new interface driver hub
[ 2.944802] usbcore: registered new device driver usb
[ 2.948532] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 2.948532] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 2.951862] USB Universal Host Controller Interface driver v3.0
[ 3.007472] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.007496] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.007506] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.007859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.007859] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[ 3.007859] usb usb1: configuration #1 chosen from 1 choice
[ 3.007859] hub 1-0:1.0: USB hub found
[ 3.007859] hub 1-0:1.0: 2 ports detected
[ 3.076533] Uniform Multi-Platform E-IDE driver
[ 3.076545] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.112503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.112513] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.112521] usb usb1: Product: UHCI Host Controller
[ 3.112527] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.112533] usb usb1: SerialNumber: 0000:00:1d.0
[ 3.112652] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.112671] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.112681] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.112748] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.112803] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 3.113003] usb usb2: configuration #1 chosen from 1 choice
[ 3.113082] hub 2-0:1.0: USB hub found
[ 3.113098] hub 2-0:1.0: 2 ports detected
[ 3.216454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.216464] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.216472] usb usb2: Product: UHCI Host Controller
[ 3.216478] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.216484] usb usb2: SerialNumber: 0000:00:1d.1
[ 3.216574] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.216596] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.216605] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.216669] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.216722] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[ 3.216928] usb usb3: configuration #1 chosen from 1 choice
[ 3.217006] hub 3-0:1.0: USB hub found
[ 3.217024] hub 3-0:1.0: 2 ports detected
[ 3.321183] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.321192] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.321200] usb usb3: Product: UHCI Host Controller
[ 3.321205] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.321211] usb usb3: SerialNumber: 0000:00:1d.2
[ 3.321307] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.321328] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.321338] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.321410] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.321471] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
[ 3.321681] usb usb4: configuration #1 chosen from 1 choice
[ 3.321759] hub 4-0:1.0: USB hub found
[ 3.321778] hub 4-0:1.0: 2 ports detected
[ 3.424761] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.424768] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.424773] usb usb4: Product: UHCI Host Controller
[ 3.424777] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.424782] usb usb4: SerialNumber: 0000:00:1d.3
[ 3.425608] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.425638] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.425648] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.425729] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.432199] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.432199] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.432199] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 3.447257] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.447439] usb usb5: configuration #1 chosen from 1 choice
[ 3.447525] hub 5-0:1.0: USB hub found
[ 3.447544] hub 5-0:1.0: 8 ports detected
[ 3.551657] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.551667] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.551675] usb usb5: Product: EHCI Host Controller
[ 3.551681] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 3.551687] usb usb5: SerialNumber: 0000:00:1d.7
[ 3.559370] No dock devices found.
[ 3.585709] SCSI subsystem initialized
[ 3.614102] libata version 3.00 loaded.
[ 3.626362] ata_piix 0000:00:1f.2: version 2.12
[ 3.626406] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.626421] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.626504] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.642093] scsi0 : ata_piix
[ 3.654280] scsi1 : ata_piix
[ 3.658092] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.658092] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.825908] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 3.958415] usb 5-5: configuration #1 chosen from 1 choice
[ 3.987057] usb 5-5: New USB device found, idVendor=058f, idProduct=6335
[ 3.987057] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.987057] usb 5-5: Product: Mass Storage Device
[ 3.987057] usb 5-5: Manufacturer: Generic
[ 3.987057] usb 5-5: SerialNumber: 058F63356336
[ 4.021704] ata2.00: ATA-5: ASUS-PHISON SSD, TST2.04U, max UDMA/66
[ 4.021704] ata2.00: 7880544 sectors, multi 0: LBA
[ 4.021704] ata2.01: ATA-5: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 4.021704] ata2.01: 31522176 sectors, multi 0: LBA
[ 4.029689] ata2.00: configured for UDMA/66
[ 4.037679] ata2.01: configured for UDMA/66
[ 4.037810] Initializing USB Mass Storage driver...
[ 4.037679] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5
[ 4.037679] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5
[ 4.041810] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.041810] usbcore: registered new interface driver usb-storage
[ 4.041810] USB Mass Storage support registered.
[ 4.049507] usb-storage: device found at 2
[ 4.049515] usb-storage: waiting for device to settle before scanning
[ 4.097898] Driver 'sd' needs updating - please use bus_type methods
[ 4.099831] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB)
[ 4.099890] sd 1:0:0:0: [sda] Write Protect is off
[ 4.099898] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.099996] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.100190] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB)
[ 4.100245] sd 1:0:0:0: [sda] Write Protect is off
[ 4.100253] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.100354] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.100367] sda: sda1 sda2 < sda5 > sda3 sda4
[ 4.107968] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.108169] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors (16139 MB)
[ 4.108186] sd 1:0:1:0: [sdb] Write Protect is off
[ 4.108186] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.108186] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.108186] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors (16139 MB)
[ 4.108186] sd 1:0:1:0: [sdb] Write Protect is off
[ 4.108186] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.108186] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.108186] sdb: sdb1
[ 4.109186] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 4.284419] device-mapper: uevent: version 1.0.3
[ 4.284419] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 4.334731] PM: Starting manual resume from disk
[ 5.127404] udevd version 125 started
[ 6.843868] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 6.843900]
[ 6.843903]
[ 6.843905] === pAd = f8a7a000, size = 580788 ===
[ 6.843909]
[ 6.843915] <-- RTMPAllocAdapterBlock, Status=0
[ 6.843955] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 7.086088] Linux agpgart interface v0.103
[ 7.108997] agpgart: Detected an Intel 945GME Chipset.
[ 7.108997] agpgart: Detected 7932K stolen memory.
[ 7.126462] agpgart: AGP aperture is 256M @ 0xd0000000
[ 7.508948] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 7.509109] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 7.509171] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.252038] intel_rng: FWH not detected
[ 8.345363] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 8.384209] input: PC Speaker as /class/input/input1
[ 8.544246] eeepc: Eee PC Hotkey Driver
[ 8.808209] input: Power Button (FF) as /class/input/input2
[ 8.840209] ACPI: Power Button (FF) [PWRF]
[ 9.108209] usb-storage: device scan complete
[ 9.172209] scsi 2:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 9.482760] sd 2:0:0:0: [sdc] 15954944 512-byte hardware sectors (8169 MB)
[ 9.486733] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.486733] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 9.486733] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 9.490735] sd 2:0:0:0: [sdc] 15954944 512-byte hardware sectors (8169 MB)
[ 9.490735] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.490735] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 9.490735] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 9.490735] sdc: sdc1
[ 9.494743] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 10.821507] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.821507] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 10.859981] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[ 11.423323] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 25.948348] eeepc: Hotkey init flags 0x41
[ 25.950231] eeepc: Get control methods supported: 0x101713
[ 25.954018] input: Lid Switch as /class/input/input4
[ 25.966972] ACPI: Lid Switch [LID]
[ 25.966972] input: Sleep Button (CM) as /class/input/input5
[ 26.004963] ACPI: Sleep Button (CM) [SLPB]
[ 26.005243] ACPI: AC Adapter [AC0] (off-line)
[ 26.005992] input: Power Button (CM) as /class/input/input6
[ 26.033512] ACPI: Power Button (CM) [PWRB]
[ 26.270608] ACPI: Battery Slot [BAT0] (battery present)
[ 26.278655] input: Video Bus as /class/input/input7
[ 26.340075] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 27.206502] Adding 3710972k swap on /dev/sda5. Priority:-1 extents:1 across:3710972k
[ 28.252426] loop: module loaded
[ 38.822440] NET: Registered protocol family 10
[ 38.822440] lo: Disabled Privacy Extensions
[ 38.998024] lp: driver loaded but no devices found
[ 39.216402] ppdev: user-space parallel port driver
[ 42.183210] RX DESC f7b11000 size = 2048
[ 42.184345] <-- RTMPAllocTxRxRingMemory, Status=0
[ 42.188673] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 42.188673] 1. Phy Mode = 0
[ 42.188673] 2. Phy Mode = 0
[ 42.211385] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 42.216666] 3. Phy Mode = 0
[ 42.240658] MCS Set = 00 00 00 00 00
[ 42.244666] <==== RTMPInitialize, Status=0
[ 42.244666] 0x1300 = 00073200
[ 42.332305] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.576723] [drm] Initialized drm 1.1.0 20060810
[ 45.581461] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 45.581478] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 45.581609] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 52.923034] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 63.446866] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 63.973843] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20080321]
[ 63.973880] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RCTP] (Node f7436cfc), AE_TIME
[ 63.973994] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.RTMP] (Node f743d734), AE_TIME
[ 63.974069] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.TZ00._TMP] (Node f743d6e4), AE_TIME
[ 65.752285] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 70.294352] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 72.014519] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 74.130075] RX DESC f2cdc000 size = 2048
[ 74.130075] <-- RTMPAllocTxRxRingMemory, Status=0
[ 74.134056] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 74.134077] 1. Phy Mode = 0
[ 74.134086] 2. Phy Mode = 0
[ 74.162224] 3. Phy Mode = 0
[ 74.166833] MCS Set = 00 00 00 00 00
[ 74.170850] <==== RTMPInitialize, Status=0
[ 74.171494] 0x1300 = 000a4200
[ 84.311463] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 85.275871] ra0: no IPv6 routers present
[ 107.301803] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 112.445270] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 112.448422] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=10)
[ 115.614428] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 118.311679] ra0: no IPv6 routers present
[ 135.063915] ra0: no IPv6 routers present
[ 138.208574] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 138.360318] usb 5-2: configuration #1 chosen from 1 choice
[ 138.364712] scsi3 : SCSI emulation for USB Mass Storage devices
[ 138.362223] usb-storage: device found at 3
[ 138.362223] usb-storage: waiting for device to settle before scanning
[ 138.365390] usb 5-2: New USB device found, idVendor=054c, idProduct=0397
[ 138.365421] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 138.365435] usb 5-2: Product: WALKMAN
[ 138.365445] usb 5-2: Manufacturer: Sony
[ 138.365454] usb 5-2: SerialNumber: 10FA82E5014662
[ 141.380261] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 143.367121] usb-storage: device scan complete
[ 143.372556] scsi 3:0:0:0: Direct-Access SONY WALKMAN 1.10 PQ: 0 ANSI: 0 CCS
[ 144.460442] ready
[ 144.460673] sd 3:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)
[ 144.587972] sd 3:0:0:0: [sdd] Write Protect is off
[ 144.587972] sd 3:0:0:0: [sdd] Mode Sense: 00 3e 00 00
[ 144.587972] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 144.588446] sd 3:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)
[ 144.707356] sd 3:0:0:0: [sdd] Write Protect is off
[ 144.707356] sd 3:0:0:0: [sdd] Mode Sense: 00 3e 00 00
[ 144.707356] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 144.707356] sdd: sdd1
[ 144.717487] sdd: p1 exceeds device capacity
[ 144.720610] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967044, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741760
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967048, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741761
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967044, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741760
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967048, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741761
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967276, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741818
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967280, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741819
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967276, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741818
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967280, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741819
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741822
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741822
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967228, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967232, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967284, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967288, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967292, limit=30820352
[ 146.627727] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 171.856444] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 176.864172] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 202.099695] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 207.098644] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 232.680962] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 237.707808] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 261.267602] usb 5-2: USB disconnect, address 3
[ 273.142015] usb 5-2: new high speed USB device using ehci_hcd and address 4
[ 273.278135] usb 5-2: configuration #1 chosen from 1 choice
[ 273.289963] scsi4 : SCSI emulation for USB Mass Storage devices
[ 273.279227] usb-storage: device found at 4
[ 273.279227] usb-storage: waiting for device to settle before scanning
[ 273.290749] usb 5-2: New USB device found, idVendor=054c, idProduct=0397
[ 273.290780] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 273.290795] usb 5-2: Product: WALKMAN
[ 273.290806] usb 5-2: Manufacturer: Sony
[ 273.290817] usb 5-2: SerialNumber: 10FA82E5014662
[ 278.322098] usb-storage: device scan complete
[ 278.326116] scsi 4:0:0:0: Direct-Access SONY WALKMAN 1.10 PQ: 0 ANSI: 0 CCS
[ 279.469199] ready
[ 279.469989] sd 4:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)
[ 279.573322] sd 4:0:0:0: [sdd] Write Protect is off
[ 279.573322] sd 4:0:0:0: [sdd] Mode Sense: 00 3e 00 00
[ 279.573322] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 279.573823] sd 4:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)
[ 279.681701] sd 4:0:0:0: [sdd] Write Protect is off
[ 279.681701] sd 4:0:0:0: [sdd] Mode Sense: 00 3e 00 00
[ 279.681701] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 279.681701] sdd: sdd1
[ 279.691215] sdd: p1 exceeds device capacity
[ 279.700150] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967044, limit=30820352
[ 279.870433] __ratelimit: 11 messages suppressed
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741760
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967048, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741761
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967044, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741760
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967048, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741761
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967276, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741818
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967280, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741819
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967276, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741818
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967280, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741819
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741822
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] Buffer I/O error on device sdd1, logical block 1073741822
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967228, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967232, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967284, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967288, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
[ 279.870433] attempt to access beyond end of device
[ 279.870433] sdd: rw=0, want=4294967292, limit=30820352
And here's lsusb:

Quote:
Bus 005 Device 004: ID 054c:0397 Sony Corp.
Bus 005 Device 002: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Did those on root terminal.

Last edited by lorsban; 08-08-2009 at 12:29 PM.
Reply With Quote

  #4  
Old 08-08-2009, 09:54 PM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

From your dmesg.

Code:
[ 138.208574] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 138.360318] usb 5-2: configuration #1 chosen from 1 choice
[ 138.364712] scsi3 : SCSI emulation for USB Mass Storage devices
[ 138.362223] usb-storage: device found at 3
[ 138.362223] usb-storage: waiting for device to settle before scanning
[ 138.365390] usb 5-2: New USB device found, idVendor=054c, idProduct=0397
[ 138.365421] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 138.365435] usb 5-2: Product: WALKMAN
[ 138.365445] usb 5-2: Manufacturer: Sony
[ 138.365454] usb 5-2: SerialNumber: 10FA82E5014662
[ 141.380261] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 79
[ 143.367121] usb-storage: device scan complete
[ 143.372556] scsi 3:0:0:0: Direct-Access SONY WALKMAN 1.10 PQ: 0 ANSI: 0 CCS
[ 144.460442] ready
[ 144.460673] sd 3:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)
[ 144.587972] sd 3:0:0:0: [sdd] Write Protect is off
[ 144.587972] sd 3:0:0:0: [sdd] Mode Sense: 00 3e 00 00
[ 144.587972] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 144.588446] sd 3:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)
Ok, your system can detect the X and try to mount it...
But

Code:
[ 144.707356] sd 3:0:0:0: [sdd] Write Protect is off
[ 144.707356] sd 3:0:0:0: [sdd] Mode Sense: 00 3e 00 00
[ 144.707356] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 144.707356] sdd: sdd1
[ 144.717487] sdd: p1 exceeds device capacity
[ 144.720610] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 144.902370] attempt to access beyond end of device
[ 144.902370] sdd: rw=0, want=4294967044, limit=30820352
[ 144.902370] Buffer I/O error on device sdd1, logical block 1073741760
[ 144.902370] attempt to access beyond end of device
There were problem related to the partition which prevent mount to mount it.

Now, run this fdisk -l /dev/sdb. I want to look at the partition structure.

TQ.
Reply With Quote

  #5  
Old 08-08-2009, 10:25 PM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Here it is, man I wish I could make sense of it like you can:

Quote:
Disk /dev/sdb: 16.1 GB, 16139354112 bytes
255 heads, 63 sectors/track, 1962 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf26d47c4

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 1962 15759733+ 83 Linux
I'm using an EeePC 901. It has 2 disks, one's 4gb, another is 16gb.
Reply With Quote

  #6  
Old 08-08-2009, 10:30 PM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Hey, I think it is my pc that's the problem since I can mount it on my wife's laptop which is also an EeePC but with the stock Xandros Distro. It's also Debian based, though but an older version.
Reply With Quote

  #7  
Old 08-09-2009, 06:51 AM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

Sorry wrong instructions.

Run fdisk -l /dev/sdd not /dev/sdb as I showed earlier .

Also, you can try the debian's forum for the some pointers.

TQ.
Reply With Quote

  #8  
Old 08-09-2009, 07:46 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Quote:
Originally Posted by bahathir View Post
Sorry wrong instructions.

Run fdisk -l /dev/sdd not /dev/sdb as I showed earlier .

Also, you can try the debian's forum for the some pointers.

TQ.
Disk /dev/sdd: 8168 MB, 8168931328 bytes
39 heads, 5 sectors/track, 81820 cylinders
Units = cylinders of 195 * 512 = 99840 bytes
Disk identifier: 0x000aec88

Device Boot Start End Blocks Id System
/dev/sdd1 * 43 81821 7973376 b W95 FAT32
Reply With Quote

  #9  
Old 08-09-2009, 09:14 AM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

Weird. In dmesg kernel detected the X as

[ 144.460673] sd 3:0:0:0: [sdd] 7705088 2048-byte hardware sectors (15780 MB)


but the fdisk saw it differently.
Disk /dev/sdd: 8168 MB, 8168931328 bytes

Something is wrong. Most probably you need to update your system.

Also can you try the fdisk -l at your wife's netbook after you plugged in the X.
Reply With Quote

  #10  
Old 08-10-2009, 02:42 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Mine checks for updates daily so I'm pretty sure it's updated. But, I'll check on my wife's laptop and get back to you.

Thanks again for the help!
Reply With Quote

  #11  
Old 08-10-2009, 02:44 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Hey,

Just did fdisk -l /dev/sdd:

Quote:
Note: sector size is 2048 (not 512)

Disk /dev/sdd: 15.7 GB, 15780020224 bytes
1 heads, 32 sectors/track, 240784 cylinders
Units = cylinders of 32 * 2048 = 65536 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdd1 1 134217728 4294967294 ff BBT
Partition 1 does not end on cylinder boundary.
Not sure why it gave a different reading before.
Reply With Quote

  #12  
Old 08-10-2009, 08:31 PM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

Yes, that is totally weird. I assumed the you fdisk -l at the different device.

Now, from, your 'correct' fdisk, you can see that the partition table is not correct.
My suggestions:

1) Backup your songs/files with other system/OS.
2) Correcting the partition
http://ubuntuforums.org/archive/index.php/t-260315.html

2b) You also can use the fdisk.. but... I'll teach you later .. Anyway backup your files first.
Reply With Quote

  #13  
Old 08-11-2009, 04:57 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Cripes, man! It looks complicated! haha!

Does it mean that the partitions in the player itself are messed up or the partitions on the computer? If it's the player, how come it works with my wife's laptop? If it's the player, can I simply format the player?

Sorry for the noob question. Totally new at this particular thing.
Reply With Quote

  #14  
Old 08-12-2009, 02:07 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Tried formatting the player but still same old same old. Worried about repairing it via pc debian console as I might royally mess up my player.
Reply With Quote

  #15  
Old 08-12-2009, 07:45 PM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

Actually, if you followed the solution in the link, I don't think it is hard. The testdisk apps is a data recovery tool, and able to repair partition related issues. As I mentioned earlier, you have to backup your files first, and start repairing/repartitioning. After you repartition, you can try to access it using your netbook. Then, you format it using the player's format function.

Good luck .

Nothing is hard. It just need practice and a litter experience .
Reply With Quote

  #16  
Old 08-12-2009, 11:58 PM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Ok, I ran testdisk. Analysed the player's drive. Not sure if it fixed it though but it does look different from before (fdisk -l /dev/sdd):

Quote:
Note: sector size is 2048 (not 512)

Disk /dev/sdd: 15.7 GB, 15780020224 bytes
64 heads, 32 sectors/track, 3762 cylinders
Units = cylinders of 2048 * 2048 = 4194304 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdd1 * 1 3763 15413238 c W95 FAT32 (LBA)
Everything's still on the player tho. Glad for that. However, I still can't mount it.

Last edited by lorsban; 08-13-2009 at 12:08 AM.
Reply With Quote

  #17  
Old 08-13-2009, 03:19 AM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

Analyze do not repairs partition. you need to go further... If you backed up your files, then no need to be worry.

Please refer to this wiki for some examples how to use the testdisk.
http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step
http://www.cgsecurity.org/wiki/Data_Recovery_Examples

Good Luck.
Reply With Quote

  #18  
Old 08-13-2009, 11:27 PM
bahathir bahathir is offline
Junior Member
 
Join Date: Aug 2009
Location: Malaysia
Posts: 16
Default

Ok, I did a detailed investigation.

1) If you format the internal memory storage, fdisk -l will shows

Code:
# fdisk -l /dev/sdb
Note: sector size is 2048 (not 512)

Disk /dev/sdb: 31.8 GB, 31879856128 bytes
1 heads, 32 sectors/track, 486448 cylinders
Units = cylinders of 32 * 2048 = 65536 bytes

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1   134217728  4294967294   ff  BBT
Partition 1 does not end on cylinder boundary.
As you can see, the partition start from block 1 and finished at 'nirvana' : (2^32 -2) Normal partition should starts from block 2 and ends at 31132608
Notice the partition type.... it should be 0b (FAT32)

2) But, on my Slamd64 GNU/Linux, I can mount it eiher with /dev/sdb or /dev/sdb1 without any complaint.

So in your case, you can try mount it with.... (if your X is /dev/sdd)
0) create a mount point : # mkdir /mnt/sony
1) # mount /dev/sdd1 /mnt/sony
or
1b) # mount /dev/sdd /mnt/sony

And see whether your system complaints. If everything in order, your X can be accessible through directory /mnt/sony

Please remember umount the mount point before you pull out the usb cable
# umount /mnt/sony
and wait until you get the command prompt.

Hope this guide is helpful.

TQ.
Reply With Quote

  #19  
Old 08-14-2009, 12:42 AM
lorsban lorsban is offline
Junior Member
 
Join Date: Jun 2007
Posts: 72
Default

Man, thanks a TON for all your help. I'll try it out ASAP and get back to you.
Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -5. The time now is 08:04 AM.