Problem when i formating sansa e250

[nixymen]

Hello ! everyone . I am from Viet Nam
I have one sansa e250 ( firmware 01.03.01H ) , and i was installed rockbox on that
And my problem is.. when I format ( setting > format ) then it restart,
sansa just display like this http://i568.photobucket.com/albums/s...y16/Anh019.jpg
"RockBox Boot loader
version : 5.0
Sansa e200
not partition file " then it to be thrown out

I've tried any way but it's not run
Please help me to fix that

Sorry , because my english is not good , can make U don't understand

[saratoga]

I think you should be able to plug in the USB cable when your Sansa is off and have it boot into the Sandisk firmware. From there you can either restore rockbox or remove the rockbox bootloader.

[nixymen]

Originally Posted by saratoga

I think you should be able to plug in the USB cable when your Sansa is off and have it boot into the Sandisk firmware. From there you can either restore rockbox or remove the rockbox bootloader.

I tried , but it's not change

[saratoga]

If the sandisk firmware doesn't work, its probably corrupted and you'll need to restore it using recovery mode:

http://www.rockbox.org/twiki/bin/vie...nsaE200Unbrick

Be careful you do not put any other files into recovery mode, or try to format it. Doing that will break you mp3 player quite badly.

[nixymen]

This way seem to be hard

[epithetless]

Originally Posted by nixymen

This way seem to be hard

Sorry, but your e250 appears to be corrupted enough that, if none of saratoga's earlier suggestions worked, this is probably your last option. You'll either need to follow the Recovery/Manufacturing Mode instructions or start looking for a new player.

[sansaguy]

Well one BIG problem he has is the 01.03.01H firmware that's on his player now. It's never worked properly from what I have been reading on the forums.

If it was my player that's where I would start. Downgrade to a more stable firmware via Saratoga's post. Good luck!