Bricked e280r, the fixes arent working!

[cageddingo]

I've got a Sansa e280r. Had the usual problem with a corrupted file, was able to enter recovery mode etc. Tried everything but the e200 software since I don't run Linux.

The problem now is that when I disconnect from USB the player won't reset itself. It just hangs after "Safe to Disconnect USB (next line) Exit USB2.0 MSD mode"

I've tried eeeeeverything I could find the Sandisk forums as well as here but I can't find any solutions.

Not to sound like a whiney noob, but pleeeeease help! The frustration is overwhelming!

[advcomp2019]

Have you tried one of our ultimate fixes but using the e200R firmware? Plus are you sure it is an e200R?

[cageddingo]

Tested every ultimate/super/miracle fix I could find, with no success. Regardless of what file(s) are transferred to the 16MBFORMAT drive, the sansa freezes up at the "Safe to Disconnect USB / Exit USB2.0 MSD mode" message. No go after that until a hard-reset (holding power button for 10-15 seconds). After reboot, the only on the drive is a corrupted version.txt file that looks like this:

Version Info: Product Rev.: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
rÉÂiò=µÁ¸Cç¬|
Base Code: ÿÿÿÿÿÿÿÿÿÿ

Starting to think I'll have to resort to an RMA, but would really prefer not to...

[advcomp2019]

If you are sure it is a e200R, here is clean version.txt for an e200R.

[KRONOS]

Send it back.

[eagledrc]

Hey I have the same problem, and I pasted the new version.txt into the player on recovery mode, but when I reboot the player, it still can't boot and it still has the same version.txt when I reconnect. How can I fix the version.txt? I am convinced that that is the problem - I have posted a forum here, but now I know that it's the version.txt.

[advcomp2019]

Eagledrc, I have seen you in Rockbox IRC at times. You might have to wait till someone gets you the file that you need.

[hassanzia]

Originally Posted by cageddingo

Tested every ultimate/super/miracle fix I could find, with no success. Regardless of what file(s) are transferred to the 16MBFORMAT drive, the sansa freezes up at the "Safe to Disconnect USB / Exit USB2.0 MSD mode" message. No go after that until a hard-reset (holding power button for 10-15 seconds). After reboot, the only on the drive is a corrupted version.txt file that looks like this:

Version Info: Product Rev.: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿ
rÉÂiò=µÁ¸Cç¬|
Base Code: ÿÿÿÿÿÿÿÿÿÿ

Starting to think I'll have to resort to an RMA, but would really prefer not to...

i have the same version file i've tried everything im planing on throwing it out