android
  #1  
Old 05-21-2009, 04:13 PM
gromit gromit is offline
Junior Member
 
Join Date: May 2009
Posts: 1
Default Power on/off, channel change from 405

I am using a Philips DVDR 5500 as the video source for my Archos 405. I'm using the SCART out on the DVD via the DVR Station; I use the HDMI out on the DVD to my TV.

Timed recordings work fine, as long as I leave the DVD switched on to the channel I want. However, I can't get the Archos to control the DVD recorder by remote control. I think I've tried all of the power off codes, but none seem to work. And I can't get the channels to change either. This is really annoying, as it means I can only record programs from one channel.

Could anyone recommend how I can get the Archos/DVR Station to control the DVD recorder?


Another thing I've noticed sometimes is if I switch off the TV when the Archos is halfway through a recording, the DVD recorder resets, and if I'm lucky I just get a few seconds of blank audio/video when I play the recording back; if I'm unlucky, the soundtrack resumes after the DVD resets, but the image remains frozen.

Could anyone advise how I could avoid these annoying interuptions?

Many thanks in advance.
Reply With Quote

Advertisement [Remove Advertisement]

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -5. The time now is 09:08 AM.