Sansa View Pinouts

[dioon]

Originally Posted by crackmonkey421

I made a video cable using pins 14, 27, and 28. Works perfectly.

i understand this... the pin 14 27 and 28 send postive signal of video an audio.. but the ground where?...

thank you for the help....

[CrowdAds]

[JSV]

The ground is the large metallic part of the connector. Solder all three negative wires (L, R and video) to this.

[happysmileface]

Does anyone know if the pinouts posted by EnzoTen are the same on the e200 models?

[happysmileface]

Never mind, i found it. It was on the rockbox website.

[Mr.Carioca]

sorry for the noobish bump..
but I just ordered a Fuze and I was wondering if it would work?
this hack with the fuze.. possible?

[advcomp2019]

The Sansas have the same pin layouts, but the View has video out tho.

[polako71]

Hello all !

great idea trying to make this cable,, anyone knows the name for that Dock Connector?

if i buy one for ipod and disamble it will work ?

im in argentina and can't get one of those cables like the ones on daydeal.com

again, i need the name for that connector.. THANKS!!!

Diego.

[EriCCirE]

OK guys, I have my USB cable and my video out cable. Has anyone made a video out cable that charges yet?

I am wondering if I can get away using the USB cable and just modify the ends, or will I need additional wires than what the USB has?

I am not about to cut up my usb cable, I have another one on order so I am not sure at the moment.

[polako71]

EriCCirE, check the fist page, there you have the specification for wich pin is for.

1 and 2, 5Volts Positive, 3 and 6 Ground, anyway confirm that with the post creator.

where did you get that connector? how do you ask for it? any name ? thanks! good luck

[addy800]

watch

You Tube

You Tube

to find out how to hack view to get rockbox

[EriCCirE]

finally made my video/charger cable, have it hooked up to my tv inside right now. The points are small, Ill get pics ones I get it hot glued.

[Rubr_Duky]

Do share....

I want to make up a cable for my car to get the audio (L & R) out, and to charge at the same time.

I tried this once, and the connector I used was crap, and I kept getting shorting, and issues with my View.

I get the pinouts, I've even done soldering. Is there a connector/cable that has all of the appropriate wires included, and in place already? I get that a USB cable really only has four wires. It appears at least, that the original USB cable that came with my View is fully populated with pins, whereas one of the cheap ones I bought only had pins enough for the charging function it was intended for.