How to unbrick the P2 with the looping updating screen using FWDN

[Sumii]

How do i get the FWDN software?

[CrowdAds]

[lebellium]

Available in attachment of the 1st post of this thread

[h4ck4me]

You can download the TJ firmware here:
http://kr.samsungmobile.com/product/...1&pdName=YP-P2
btw the site is VERY SLOW

[Absolution]

Just confirmed:

Start off by doing hold down power + reset trick (you can let go after windows detects a new device that it doesn't have drivers for). Your x64 host will not be able to install the .sys/.ini driver here.

If you have x64 bit windows
1. Install windows XP mode in Microsoft Virtual PC.
2. Mount the unknown device from your host pc to the virtual pc (on the virtual pc top menubar, click USB->Unknown Device (attach).
3. Install the 32bit driver as normal and proceed with the rest of the original instructions

[Nickz]

Hey guys im stumped......ive done everything however im not gettin no message on the acutal screen saying its come on and found it, it just makes a noise and nothing happens what do i do im so confused :|

[stepotronic]

Just to let you know. There are x64 bit drivers. You can use it at least for the T10 with the attached FWDN of the first post.

I did not upload it but still: Enjoy
http://www.megaupload.com/?d=CYQ20XHR

[Exa_Bytez]

Thank god, this thread had saved my $50 by reviving my P2...thanks to the thread starter

[Lilith]

http://www.megaupload.com/?d=CYQ20XHR

x64 drivers guys

[ryatwo]

Hi guys I was told that this method will help unbrick my YP-Q1. I've tried many times over, but to no avail.

Could someone help me out please?

[azzzardo]

I tried many firmwares by FWDN, but T10 still freezes,
only with 2.00 UMS KR firmware restarts with this message: "please upgrade rsc file", i tried to charge Rsc file by FWDN but it doesn't work

windows doesn't recognize it as usb device and I can't put files in ROOT folder;
Xp recognizes it as Telechip Firmware Download Driver

could I try with tcctool-win32 too?

[azzzardo]

1 - 10 ok, but when restarts my T10 freezes again!

[Izkandar]

Soto you are just my god, my idole ...

After hours and hours searching for a solution to save my Samsung YP, you just did it.

Even if that post is very old, I just would like to say thank you for your help. Yeras later you are saving people from a disaster.

Thank you again Soto for you help.

Regards.

Alex

[lebellium]

A disaster, really?

But I'm glad to hear that some people are still using the P2, nice!

[lunix]

im so glad i found this very helpfull site. i finally unbrick my p2.
many thanks to sotodefonk for the detailed instructions and lebellium for p2 firmwares

thanks abi!

[The DarkSide]

This was one of my favorite players. I'd always hoped for an update with 64gb,...sigh,...

[lebellium]

@Lunix: You're welcome

@TDS: Between 16GB and 64GB there is 32GB first of all
Or maybe you mix it up with the P3?