Prev Previous Post   Next Post Next
Old 12-01-2012, 08:07 AM
almo88 almo88 is offline
Junior Member
Join Date: Nov 2012
Posts: 3

Thank you for the advice.

As far as I can tell - the HD connector is in place - it is solidly in place with no freedom of movement that I can discern.

Although I have no easy way of connecting the HD to another computer to verify this, I do not think the problem is in the HD formatting. Two reasons for that :

1. The HD worked fine right up to the moment I opened the unit to replace the battery.
2. I do not get any motor sounds from the HD when I power up the unit. This suggests to me that the HD is not receiving any power, or it is fundamentally damaged and doesn't "turn on" when power is first applied.

It is difficult to reach the lower side of the PCB. Is it possible I cause the problem when partially lifting the PCB to access the Battery connector?

Thank you for all the advice!
Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:53 PM.