I want to pop in this forum with an experience I just made.
I donīt know if anybody ever tried to change Q2īs battery?
(at least I wonder to read nothing about problems reg. this)
Because the available accu is much too large (about 5mm).
I tried different stores, returned the first, but then decided
to try anyway (in the absence of alternatives).
The superplus 5mm is the charging electronic.
So I uncover it by removing the yellow film and bend over the
circuit board as flat as possible to the backside of the accu.
Now the square fits, but is too thick, of course.
Solution for this is not very beautiful, but it works.
If not that expensive, I would go for a design skin to cover the hole,
but a piece of tape does the job as well
|disassembly, hardware, inside, open, q2, samsung, taking apart, yp-q2|
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 02:01 AM.