Prev Previous Post   Next Post Next
Old 12-22-2011, 09:32 PM
t2t t2t is offline
Junior Member
Join Date: Oct 2011
Location: Virginia
Posts: 20

I suspect in the situation, that most scratch removers will not fully do the necessary removals. The scratch removes / polishes are designed for clear coat paints on cars and are not designed to cut into the paint to remove oxidation like the old paint on the cars before the 1990s.

I've done scratch repairs on vehicles and I usually wet sand with a 2,000 grit paper. You could do this in an area a bit out of the way - down towards the bottom of the player as a trial. Keep the area moist - but, be careful not to get moisture down in the buttons, etc. Keep on sanding slowly without applying too much pressure. Then, wipe up the moisture and the fine sand / plastic particles with a paper towel. Then, use some automotive scratch remover - Meguier's, 3M, etc. With a very soft towel, keep working with small amounts of the polish and work in tiny circular motions. When done, wipe the whole area to remove any material or extra debris.

If your "test" area looks good, then move onto some other areas that are more visible to the eye - such as the viewing screen. Keep the area you work on small and focus on your work. Carefully, you'll really improve the situation and the looks of the player. You might not get it back to 100% or like it was on the first day - but, you'll be a whole lot better off than you are now.
Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:27 AM.