Radio.ini and "pseudo RDS"

[dfkt]

Just a heads up, maybe some of you know about that already...

Same as on the Cowon D2, you can edit the radio.ini file in the S9's system folder with a text editor to add station names to your presets.

"S" is the frequency (without decimal dots), "N" is the name of the station.

[FM]
S1=8860
N1=Radio 88,6
S2=8990
N2=Radio Wien
S3=9200
N3=Ö1
S4=9290
N4=Radio Arabella
...
S22=10580
N22=Krone Hit
S23=10730
N23=Radio Stephansdom

[CrowdAds]

[Olley]

Thanks, dfkt. Does the station ID then show up when the player is on that station? I'd test it myself but my S9 is home and I'm at work.

[dfkt]

Yes, that's what I meant... heh, stupid me, forgot to explicitly mention that most important part: the station name will show up on the FM screen.

[The DarkSide]

Wow, good info dfkt. Bookmarked!!!

[DanielF50]

Originally Posted by The DarkSide

Wow, good info dfkt. Bookmarked!!!

It needs a sticky IMO, I woulda loved to be able to do that with my ZVM >.<

Dan

[rinzwind]

Thank you for this bit of information

1 thing: do these alterations get overwritten when I rescan for new stations?
Probably... so guess I'll save a backup just in case

[dfkt]

Yeah, just copy the radio.ini file to your computer for safekeeping. I didn't even create a new one for the S9, I just used the one I had on my D2 already.

[OnYourMark]

I edited the station information, and the correct info gets displayed, but the S9 always eventually freezes (note: it freezes only when browsing with presets). The audio continues, but the touch screen and hard buttons are unresponsive.
16GB FW2.09.
I have 17 stations, from 8810 to 10790

Any help? Thanks in advanced and thanks for the radio.ini info.

[newone]

Thank you very much for the useful hint!

Did someone test, if its possible to simply write prtoect the radio.ini file by its properties?

[dfkt]

Not sure if Cowon's firmware respects Windows' file protect settings.

[newone]

Well, actually it seems to have no effect. I just tested it, but I didn't do a full scan. I aborted both times and both times the saved stations were still there. So if you accidentally hit the scan button there is no worry, since the scan seems to save its information only if run to the end.

[Leroy Bad]

This is very interesting, I tried this on my D2.

Now why does the radio.ini have the N field if the D2 doesn't support RDS? I wonder if theres some parameter that can be used to allow the D2 to read the RDS info by itself then??

[dfkt]

Nah, it's just "pseudo", for people to enter the station names manually. The radio chip (Sanyo LV24020LP) is not capable of retrieving RDS data.

Which makes you wonder why Cowon don't mention that radio.ini feature anywhere in the manual...

[Claw]

Gee thanks - you just ruined any hope I had at getting RDS on this thing

Oh well ... I consider lack of RDS and Gapless as main deficiencies of the S9.

Originally Posted by dfkt

The radio chip (Sanyo LV24020LP) is not capable of retrieving RDS data.

[The DarkSide]

Originally Posted by Claw

Gee thanks - you just ruined any hope I had at getting RDS on this thing

Oh well ... I consider lack of RDS and Gapless as main deficiencies of the S9.

As long as you get that gapless going, SCREW THE RDS!!!!

You da' man Claw!!!

[sweet as suga]

Thank you dfkt. I've just labelled all my stations.

[majoSK]

God bless you dfkt. You are king, you are brain, you are No1. It is interesting, that this feature until now nobody not appeared. Thank you.

[Confispect]

Nice, worked perfectly.

[prsut]

Now, I have Cowon S9, you can run JetShell, select Options -> Device Parameter and write pseudo info for RDS...

My best...