|
#1
07-10-2011, 02:25 PM
|
|||
|
|||
My D2 and this plug-in MP3 power supply
I bought my original D2 in early 2008. Recently I picked up a plug-into-US-house-current MP3 power supply which has a fold-in/out US-type house current plug and a USB port that would run the cable to my D2. This item is small, about 1.5" by 2.5". On the little label on it, I see "Input: AC 110-220V 50/60 Hz; Output: DC 5.5V 200-300 mA".
Is that output the correct and safe one for my D2? Thanks 
|
| Advertisement | [Remove Advertisement] |
|
|
|
|
#2
07-10-2011, 02:28 PM
|
||||
|
||||
|
My D2 AC adapter (the official one) says 5V, 2A (2000mA) so I wouldn't suggest that one you have. The different voltage number could be very bad.
__________________
iPod Video 80GB, 2 Clip Zip(4GB and 8+16GB), Sansa e280 8GB <-All 4 Rockboxed  FiiO E11, Digizoid ZO, FiiO E6.Cowon X9 32+32GB, iPod Mini 32GB, SGP 5.0 w/16GB card, Galaxy Tab 7.0 Plus 16GB+32GB (ICS).
|
|
#3
07-10-2011, 03:58 PM
|
||||
|
||||
|
USB specification says that USB port should provide 5Vą5%, so no more than 5.25V. 5.5V shouldn't be a problem (it most probably go much lower when connected), but the player can be warmer during charging. Amperage (200-300mA) is very low - about half of that what standard PC USB port can provide - prepare for a long charging.
|
 |
| Tags |
| power supply |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 04:00 AM.
