Prev Previous Post   Next Post Next
Old 03-28-2011, 06:54 PM
deadfire55 deadfire55 is offline
Junior Member
Join Date: Mar 2011
Posts: 4

Alright, that plug came in today.

I cut it about two inches from one of the ends, separated the four wires, used tweezers to seperate the cotton strands from the wires, cut off the cotton, held the wires an inch over a lighted to remove that colored coating (be sure to do the copper color one), did same for headphone wires, connected the same colored wires, made sure they worked, took some epoxy and covered the bare wires, made sure it worked, let it dry, put black electrical tape over the epoxy, heated a heat shrink tube over the tape. All done listening to them right now
Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:24 AM.