clip+ in new colors, purple and white

[TheConciseStatement]

Originally Posted by dfkt

The Clip+ housing consists of only two halves, front and back. You'd have to swap the whole front half of the housing (or the whole housing, since the back of all variants is black anyways, AFAIK). The halves are clipped together (no surprise there, going by name ) - you'd probably need some thin prying tools to get it open without breaking it, or at least some strong finger nails.

Here's how it's done with the older model:
http://www.anythingbutipod.com/forum...ad.php?t=55110
http://anythingbutipod.com/2007/11/s...-disassembled/

Thanks. I think I'll wait til someone else tries it with the Clip+ models (someone more handy and nimble than I am) since the casings seem to be really quite different, as per the demands for improved build quality.

[Kenaneu]

I'd second the pry tools. Just get some off ebay for a buck or two and gently pry. You'll find out quickly where the clips are. With a little patience, it should be a snap!

[Mikerman]

Pry tools also are available from meritline.com, at a low cost ($2.75 and up shipped). http://www.meritline.com/7-in-1-tool-kit---p-39986.aspx