|
#1
|
||||
|
||||
|
My S60 battery, like others on this thread, is not lasting as long as I'd like it to. I noticed that the F series players use a similar size and plug for their batteries, but they are 4V instead of the S series' 3.7V. I did a quick test on my S player to test an F series battery on it, and the battery did work. But, has anyone used an F series battery for an extended time on the S series? I'm concerned that the voltage difference might damage my player.
Thanks, Brian
__________________
Active DAP's: Cowon D3, Sansa Clip 2GB Rockboxed Non-working / Sold DAP's: Cowon S9, Zune 30, iPod Video 30/80GB, iPod 4G, Sansa E280, Gigabeat F40, Gigabeat S60, iPod Shuffle 1G Cans: Sennheiser HD 600, Yuin PK1, Sony MDR-V6 |
| Advertisement | [Remove Advertisement] |
|
|
|
|
#2
|
|||
|
|||
|
The battery voltages are the same, and I've heard of people swapping Ipod4G batteries into both F and S gigabeats without trouble, so it should be fine.
|
|
#3
|
||||
|
||||
|
So far, so good (adding a F40 battery to my S seriies). It's a tad thicker, so it's a bit of a tight fit. But, it's working and the battery is noticably longer. Thanks!
__________________
Active DAP's: Cowon D3, Sansa Clip 2GB Rockboxed Non-working / Sold DAP's: Cowon S9, Zune 30, iPod Video 30/80GB, iPod 4G, Sansa E280, Gigabeat F40, Gigabeat S60, iPod Shuffle 1G Cans: Sennheiser HD 600, Yuin PK1, Sony MDR-V6 |
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
All times are GMT -5. The time now is 12:26 AM.











Linear Mode
