e200tool: Nothing after "Execution started"...
Here's my problem with e200tool:
I use it with Linux (If you know how I can make it work with Windows I would be happy because I'm not a Linux fan!). All is right until this sentence:
I show you what I do:
root@ubuntu:/home/ubuntu# sudo /home/ubuntu/Desktop/e200tool recover /home/ubuntu/Desktop/BL_SD_boardSupportSD.rom
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Searching for device 0781:0720 ... 9 8 7 6 5 4 3 2 1 0 not found!
Searching for device 0b70:0003 ... found!
Initializing USB stub (4780 bytes) ... done!
Writing '/home/ubuntu/Desktop/BL_SD_boardSupportSD.rom' to address 0x10600000
Searching for device 6666:e200 ... 9 8 found!
Write at 0x10660198
Running from address 0x10600000
Searching for device 6666:e200 ... found!
I should see the Sandisk logo on my Sansa's screen. But there is nothing. He is black and the srollweel is on yet. Moreover, I should have a 16MB device, but I don't have it.
Do you know what I should do to access to the recovery mode? I really don't know what to do! Did I miss something?
My themes: Vistattitude, Red Effect, Blue effect, Blue effect v.2
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 10:30 AM.