Howto: install other firmwares!
so please look first here before asking in another treath!
this is the how to to change from us to eu to kr to kv(la fleur) it works in every direction! even if the t10 is broken(updateloop)!
3)a small thing to press the reset button
4)http://haxx.rockbox.org/utils/tcctool/tcctool-win32.zip this is the tool
to patch your t10(more easy than fwdn!)
5) the new firmware
6)put both firmware files on the player
second: patching your t10
1) connect it in normal usbmode
2)hold the powerbutton and press the reset button
3)release the powerbutton when your pc shows "new device found"
4)install the driver which is located inthe linked archive!
5)go to => start => run/ausführen and enter "cmd"
6) drag the "tcctool.exe" in the consolewindow(cmd)
7) add " -d ypp2" with the gap behind the " of the dragged file! and then
again a gap and drag the small file in the console window!
8) press enter and wait until it sais "download" finished or s.th like that
9) release the player
third: upgrading the firmware
2)disconnect it and start it w.o connection to the pc
3) it updates the firmware
If these directions are confusing or not working for you, consider going directly to this post:
DONT MIND THE MAY SHOWING FIRMWARE UPDATE ON THE T10! IT UPDATES ONLY WHEN YOU PUT THE SECOND FILE ON THE PALYER LIKE NORMLY!
so would this also work, if i would want to change my BB firmware to the normal Samsung one?
Yes it should defently work :) you can try you cant break your t10 with that patch :) the firmware will only be changed if you put the 2 files on the t10. in the other case nothing will change. this changes only the acception for new firmwares!
here's a batchfile, so you don't have to type the commands, be sure the needed files are all in the same folder as the patch_it.bat
tested with winxp, works fine.
thx for your help! this makes it more easy! now its for realy everybody doable even if he/she oesnt now how to use a pc xD
"la fleur special edition" sammy green hils http://uploaded.to/?id=c0tmes
"mtp" version!(eu) sammy http://uploaded.to/?id=etghaf
"us version" sammy http://uploaded.to/?id=h2hlyw
"La fleur special edition" la fleur2 http://uploaded.to/?id=3zvyja
"La fleur special edition" malang http://uploaded.to/?id=j3mnej
"La fleur special edition" moki http://uploaded.to/?id=dtuhjy
"La fleur special edition" colourfull dream http://uploaded.to/?id=mdg78l
"La fleur special edition" beautyfull night http://uploaded.to/?id=kx08lr
"La fleur special edition" jellmon http://uploaded.to/?id=3a5pa2
"La fleur special edition" pumpkin http://uploaded.to/?id=k1fxdn
"La fleur special edition" wonderland http://uploaded.to/?id=ta1pu9
"La fleur special edition" chaplin http://uploaded.to/?id=j23h59
every firmware should work with all versions of the t10!
if you want other skins you must load the wanted firmware and repalce the 2 firmware files in the archive!
for other themes please download one of the two and replace the two firmware files name it and host it!
i will collect the links in this post and please you to delete yours after showing the link because its more easy to have everything in one post!
of course i will notice your names after ever package you did!
i dont have much time so it would need a time to get all but i'm sure that other help me! thx in advantage
if someone has got a new versionof the firmware please replace the archive with the new one! thanks
With the bb firmware it doesn´t run
:( It isn´t valid for the bb player. I tried with many firmwares, and when the player start to change the .RSC, says that it isn´t the correct firmware. Then restarts with the same BB firmware (happens nothing). Thank you for this post. I hope that someone have the solution to change the firmware to this **ed BB players.
in my case the update didn't work exactly as in the manual described. I should've mentioned it before, but i thougt i made some mistake myself... cause after patching the file the player turn automatically off and on, and it says: "Please update RSC-File". And if you disconnect / reconnect /whatever the player, it goes straight back to the old firmware.
so you HAVE to copy (i said COPY, not cut&paste!!) the 2 firmware files to the player FIRST... and AFTER copying the files you can do the power+reset-thingy and run patch_it.bat
so i flashed my player into a BB-Version....
I got a new option in system called "account-info" and a new symbol in the main menu, it's a speech bubble with a "tone" or "note" in it. what is it for? :confused:
the file browser is in the premium-package now, and in music i got "rhapsody-channels"
in some ways the firmware behaves really strange, my pictures are shown under movies and don't work and in pictures the player says "no files".
BUT reformatting the device helped...
then i flashed my player back to "normal" korean firmware, as described above and it works as well
just extract the archive
connect your player to the pc; press the powerbutton+reset @same time; release it start the patch_it.bat wait until it has finished(upload completed)
reset your player and put the firmware files on it! this should work.
if not put the two files on the player(befor pressign power+reset!) and then apply the patch but leave the two firmware files in the folder with the patch.
have you done exactly this? if not try again! must works
AND DONT FORGET:: IF YOU HAVE USED FWDN.EXE FIRST YOU MUST REMOVE THE DRIVER FROM IT! THEN IT SHOULD ASK FOR A NEW DRIVER AND THEN YOU MUST USE THE ONE WHO IS IN THE FOLDER (THAT IS INSIDE THE ARCHIVE)
otheerwise it wouldnt work!
I try but BB doesn´t patch...
After I did the patch, the player shows "Please, upgrade RSC file" for 5 seconds. After, if I disconnect, if the files have the original name (T10J, T10, etc...) the device do nothing. If I rename the firmware files to T10B.RSC, T10B.ROM, then try update the firmware, show first an error "invalid version", reboot, and after a while showing "checking firmware", shows "invalid version". The player is again with BB 3.03 firmware. :(
ignore it, you don't have to do it if you use a firmware from post no.5
it's the same error i got at first....
as i said in post no.7, you have to copy the two firmware files to the main directory of the player AT FIRST. BEFORE putting the player in recovery mode and running patch_it.bat. not after...
after patch_it.bat the player will automatically turn off an on and starts flashing the firmware. after upgrading part 1/5 the player turns off, then you have to disconnect it and turn it on again. the player automaticalley does the rest of the updates.
does anyone have links to different firmwares like the UMS KR, or EU?
I did it!!!
I did it sucessfully. The operation order is this:
1) Download the firm version from the links in this post (i used the first, LaFleur).
2) Decompress it to a folder, in my case d:\lafleur
3) Plug the player to usb
4) Upload to the player root the two files T10V.ROM and T10V.RSC.
5) While the player is connected, in this order:
a) push power button, dont release it.
b) push the reset hole and release it
c) release the power button.
Then the player is ready to receive the new rom file.
6) If windows says "New hardware found", you must use the drivers in the lafleur folder.
7) Open a cmd window.
8) Go to d:\lafleur folder
9) Type patch_it and ENTER.
10 ) This appears:
D:\lafleur>.\tcctool.exe -d ypp2 *.rom
tcctool v0.1 - (C) 2007 Dave Chapman
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
[INFO] Using device "Samsung YP-P2"
[INFO] Searching for TCC device...
[INFO] Found TCC device, uploading application.
[INFO] Patching application uploaded successfully!
Presione una tecla para continuar . . .
11) After the upload, the player shows lafleur screen, update the firmware (1 of 5) and shutdown.
12) Unplug the player
13) Power on the player, then the rsc file starts to load to the player memory (2 of 5). The player shutdown.
14) Power on the player again and VOILA...
Thank you all for this post. Bye bye, BB :D
Good to know Best Buy can no longer hold their T10 customers hostage to cruddy functionality! :cool::D
@allama: you don't have to do
7) Open a cmd window.
8) Go to d:\lafleur folder
9) Type patch_it and ENTER.
it's a batchfile, you can execute it with doubleclick, just like an exe-file :D
I have Samsung YP-T10JC (8 GB) by in Germany in Dezember last year.
I will use this player under Linux. I am a little confused. What is the best way to install UMS firmware? Sorry , when I retry a question in this thread but I need help!
standard official Europe MTP EU 3.03 firmware here
With those have to manually add the different themes & games and has the Sammy startup screen with 3 theme options
If you want the latest La Fleur UMS firmware 3.03 (ie no Sammy startup) and with 4 Theme options then pick the modded firmwares hashtowent has posted above with the particular theme desired included
btw. the easiest way (imho) is using tcctool
1. Lad dir die gewünschte Firmware aus Post Nr. 5 runter.
Hier kannst du dir zu den Firmwarebezeichnungen ein Bild machen bzw. die version runterladen, in der der Startscreen (Hello, it'sa me, Sammy) NICHT durch den LaFleur-Startscreeen ersetzt wird. Sind natürlich alle UMS auf der Seite.
2. lad dir das tcctool und die patch_it.bat runter (Post Nr. 1+4), wennst eins der Pakete aus Post Nr. 5 nimmst brauchste das nich, da sind die Files schon dabei.
3. Stell sicher, dass tcctool, die patch_it.bat und die beiden gewünschten firmwarefiles im gleichen ordner sind.
4. Schließ deinen Player an und kopier die beiden Firmwarefiles ins Stammverzeichnis (also da wo auch die ordner music, video usw. liegen). Lass den Player angeschlossen.
5. Halte, während der Player angeschlossen ist, die Powertaste gedrückt und drücke gleichzeitig kurz die Resettaste.
6. Der Firmware-Chip des Players wird von Windows erkannt. Den Treiber lässt du nicht automatisch installieren, nein, du gibst ihn manuell an. Is die inf, die bei tcctool dabei is.
7. Ist der Treiber installiert, kannst du die patch_it.bat ausführen. Wenn das Tool fertig is, bootet der T10 automatisch neu und installiert Part 1/5 des Firmwareupdates. Nun darfst du den Player wieder abstecken und einschalten. Der T10 macht nun die restlichen Updates und geht wieder von selbst aus.
8. Player wieder anschalten und sich darüber freuen, dass der Player in Zukunft als stinknormaler Wechseldatenträger erkannt wird.
die la fleur enthalten je ein std theme (pumpkin usw) udn ein simples la fleur theme! sidn auf basis der kr firmware!
also kansnt du um es zu vereinfachen einfach eien der la fleur firmwares runterladen udn hast sammy nurnoch als theme nicht mehr den startscreen!
Mahlzeit... bitte schön englisch sprechen. Danke.
|All times are GMT -5. The time now is 03:42 AM.|